
|
|
C430 Multi-Hazard PAPR System
NIOSH Approved: TC-23C-2321
The new Multi-Hazard system is a high air flow Powered Air Purifying Respirator (PAPR) offering those exposed to potentially dangerous respiratory threats the ability to perform physically demanding tasks while providing a high level of protection.
The NIOSH approved system features a reusable, loose-fitting butyl head cover.
No Fit Testing Required
|
|
|
C625 Multi-Hazard PAPR System
NIOSH Approved: TC-23C-2325
C625 PAPR System is the ideal solution for protection for responders and receivers The new C625 PAPR combines the safety, reliability and user acceptance of the C430 PAPR with higher airflow and independent low flow and low voltage alarms. The NIOSH approved system features a reusable, loose-fitting butyl head cover.
No Fit Testing Required
|
|
|
Flowmaster Powered Air Mask
The SafetyTech Flowmaster is a tight-fitting face mask with an integrated motor blower with HE (High Efficiency) Filter. Ambient air is drawn through the HE filter resulting in a steady flow of purified air, keeping the user cool and protected.
The System is ideal for mold remediation, asbestos abatement and lead paint abatement.
|
|
|
PureAir PAPR System
NIOSH Approved: TC-21C-0799
Protection for Health Care Workers / Infectious Disease Labs / Industrial / Forensics /
The PureAir Bio-Response Kit provides greater protection than half-mask respirators. Additionally the system provides protection to the eyes when blood borne pathogens are present.
- No Fit Testing Required
- Accommodates facial hair and prescription lenses
- Permits use of a stethoscope
- NiMH Rechargeable Battery ; 12 hr D-Size Alkaline Battery Pack, or a Single 7+hour Disposable Battery.
- Tyvek QC Head Covers with Snap-Fit Connector.
|
|
|
C420 PAPR System
NIOSH Approved TC-23C-2188 / TC-23C-2308
PAPR systems are waist mounted, battery powered, air purifying respirator systems that filter out Toxic Industrial Chemicals (TICS) and Toxic Industrial Materials (TIMS). They do this by filtering ambient air via two combination filter cartridges, delivering over 130 liters per minute to the user's gas mask. The cooling effect increases work times, comfort and protection.
SafetyTech C420 PAPR Systems are the most rugged and widely accepted PAPR's in the world. Military tested and battlefield proven, these systems are also ideal for harsh industrial environments were longer work times and repeated use are the norm.
SafetyTech is the premier provider to the U.S. Military with over 50,000 systems fielded.
The SafetyTech International C420 Systems are NIOSH Approved to meet 42 CFR Part 84 requirements and are OSHA Compliant.
|
Call us! Update in Process.
|
|
FlexAir TM PAPR
NIOSH Approved: YES
The FlexAirTM PAPR by SafetyTech International is an extremely versatile, high air flow system that can be used for biological and particulate protection in a two filter configuration or converted to a 3 cartridge system providing protection against TICS (Toxic Industrial Chemicals) TIMS (Toxic Industrial Materials).
Key Features:
- High Air Flow
- Lifetime Li Ion Battery
- On board battery provides 8 hours
- Very Light Weight
- 2 or 3 filter Convertibility
- One-size-fits-all visor style head cover, cape styles also avaliable
- Lightweight Breathing Hose
- Independent Low Battery and Low Flow Alarm
- Microprocessor Controlled
- NO FIT TESTING Required
The FlexAirTM PAPR System has completed NIOSH approval to 42 CFR Part 84 |
|
|
Promask 2000 Gas Mask
NIOSH Aproved: TC-84A-3320 / TC-84A-4524
The Promask 2000 gas mask is designed to meet the critical hazards encountered in civil defense, first responder, healthcare, decontamination lines and industrial situations.
This Air Purifying Respirator (APR) incorporates the highest standards in protection with exceptional comfort and reliability.
Used around the world by Incident Response Teams, SWAT and Police this mask is among the most widely accepted in the industry.
- Dual filter connections facilitate left or right-handed operation
- Compatible with tactical equipment, including optical, communications, shoulder fired weapons and helmets
|
NIOSH Approved:
|
|
M95 Gas Mask
NIOSH Approved: TC-84A-3320 / TC-84A-4524
The Safety Tech International M95 Gas Mask is designed to meet the critical hazards encountered in warfare and incorporates the highest standards in NBC protection with unrivaled comfort, reliability and wearer acceptance. Lightweight and comfortable to wear even over long periods, its low breathing resistance facilitates extended wear without adversely affecting user performance. Small silicone inner-orinasal mask provides a comfortable fit against the skin and reduces dead space to a minimum (CO2 content of the M95 mask is < 0.7%). It’s fast donning for immediate protection. (Donned and sealed in < 8 seconds.) The stretch property of the polyester/Lycra head-harness enhances wearer comfort, particularly over long periods. The head-harness is resistant to chemicals and aging.
The facepiece has filter connections on both sides in order to facilitate left or right-handed operation. Close-fitting design is compatible with tactical equipment used in field operations such as optical, communication equipment, shoulder-fired weapons, protective clothing and helmets. Halo-butyl rubber used for the M95 Gas Mask is specially engineered to enhance resistance to known NBC or CBRN agents.
|
|
|
SGE 400/3 Gas Mask Negative Pressure Air-Purifying Respirator System
NIOSH Approved: TC-84 A-3320 / TC-84A-4524
The SGE 400/3 is a negative pressure gas mask with a low profile design allowing over 90% field of vision. It offers a high impact resistance face piece with right, center, or left filter mounting ports.
The facepiece is made with a Non-Allergenic inner mask and surgical grade silicone rubber face seal.
|

|
|
SafetyTech International
M120 CBRN Gas Mask System
NIOSH CBRN Approved: TC-14G-0283
The SafetyTech International M120 CBRN-Approved full facepiece respirator is ideal for riot control and HAZMAT response due to its maximum comfort and excellent permeation resistance to a wide variety of toxic materials and CBRN agents
- CBRN CAP-1 Rated
- Industry Leading Comfort
- Wide Field of Vision
- Dual Filter Ports
- Integrated Speech Diaphragm
- Accommodates Prescription Lenses
|
|
|
ResponderTM CBRN PAPR System
The First NIOSH CBRN Approved PAPR System
The ResponderTM PAPR is a belt-mounted, battery powered respirator with a choice of 2 proven tight-fitting facepieces. The system can be purchased as a complete kit or tactical and first ResponderTM personnel currently equipped with a Millennium®, or Ultra Elite® CBRN APR can purchase an upgrade to the comfort and added protection of a PAPR.
- C420 PAPR provides 20x protection over APR
- Over 50,000 C420s fielded with a proven record of reliability
- Choice of ResponderTM Canister or Multi Gas Particulate Filter for non-CBRN use
|
|
|
SafetyTech M110 CBRN Gas Mask / APR
NIOSH Approved: TC-14G-0283
The SafetyTech CBRN Approved M110 Full-Facepiece Respirator is ideal for police, security, SWAT teams and military personnel for CBRN approved respiratory protection in combat, riot control or other tactical situations.
- Available in two sizes
- Polycarbonate lens resists scratching
- 40mm right or left filter mount
- Bi-Ocular lenses for excellent field of vision and weapons sighting
- CAP-1 CBRN Canister
- Next generation to SafetyTech M95 Mask
- Accommodates Prescription Lenses
|
|
|
| DO NOT USE SAFETYTECH INTERNATIONAL PRODUCTS UNTIL THE USER MANUAL IS READ AND UNDERSTOOD BY THE USER. THE USER MANUAL IS AN ESSENTIAL PART OF SAFETYTECH INTERNATIONAL RESPIRATORY PROTECION EQUIPMENT. IF EQUIPMENT IS NOT PROPERLY ASSEMBLED, CONNECTED AND USED IN STRICT CONFORMANCE WITH THE INSTRUCTION MANUAL, CONTAMINATED AIR MAY BE DRAWN INTO THE SYSTEM, RESULTING IN EXPOSURE WHICH MAY LEAD TO SERIOUS BODILY INJURY OR DEATH.
USE BY UNQUALIFIED OR UNTRAINED PERSONS OR USE OTHER THAN IN ACCORDANCE WITH THE INSTRUCTION MANUAL IS DANGEROUS AND MAY EXPOSE THE USER TO SERIOUS BODILY INJURY OR DEATH.
|
|
|